Air distributor
Air distributors are intended for distribution of air in rooms and tight installation of panel, highly effective filters of thin and ultra-thin purification of air. They are used for the needs of different types of industrial enterprises, different types of laboratories and various health care facilities. They are made with increased requirements for tightness, to avoid the possibility of mixing polluted air from the outside of the ventilation system.
The air distributor consists of the tight case, elements of tight installation of the panel air filter, elements of regulation and measurement of an air stream. The tightness of the panel air filter installation is achieved due to the tight fit of the filter seal to the special aluminum profile of the air distributor in the middle of the housing. To achieve a more accurate flow of air through the filter in the design of the housing provides a control valve. The control of tightness of installation of the panel filter is also provided air and filter contamination control.
Ventilation grilles are mounted on the air distributor from the side of the room, by hidden fasteners that create the required type of air flow (air dividers, perforation grilles, rotary diffusers, louver grilles, etc.).
Air distributors are mounted in the corresponding prepared openings of a false ceiling and wall designs, using the hidden fastenings.
The joints between the individual elements are additionally sealed with a silicone-based sealant with guaranteed quality.
At the request of the Customer the air distributor can be adapted under any chosen type of the panel filter.
The main technical characteristics of air distributors
Standard dimensions | According to the technical appendix |
Standard filter type | F9, ERA, HEPA, ULPA |
Standard filter sizes | 305x305mm, 457x457mm, 305x610mm, 485×485, 510×510, 526x526mm, 610x610mm, 650x950mm, 610x1220mm |
Standard filter height | 48mm, 78mm, 150mm, 300mm |
Type of connection to the ventilation and air conditioning system | Vertical branch pipe |
Horizontal branch pipe | |
Section of a branch pipe | Round |
Rectangular | |
Performance materials casing | Galvanized metal, 1,0mm thick |
Stainless metal, 1,0mm thick | |
Aluminum sheet, 1,5mm thick | |
Surface coating | Polyester powder paint |
Polyester powder paint with antibacterial properties | |
Standard equipment | Seals for installing a panel air purification filter |
Fasteners of the panel air filter | |
Mechanical valve for air flow adjustment | |
The union for control of tightness of installation of the panel air filter | |
The union for control of pollution of the panel air filter | |
Ventilation grille fasteners | |
Maintenance of air filters | downside-service from the side of the room |
topside-service from the side of the ceiling space | |
Additional equipment | Automatic air flow control valve |
Mechanical valve for constant air flow control | |
Giving an electrical signal about the contamination of the filter element |
The elements are covered with powder paints, sintering method. Coatings characterized by superficial hardness, resistance to treatment disinfecting solutions, is not conducive to the formation of cracks and generation of microparticles from the working surface. The color of the coating can be selected according to the RAL colors for powder paint.